Computer Problem Tips Overcoming Failure Log in to Windows

Or turn me to restart the computer, but the computer only displays an error when trying to sign in to Windows is the nettle. This article may help address them.

When the computer startup, and in fact does not want to go to Windows with an error such as' dll not found 'or may have the' blue screen 'may be caused by many things, among others:

1. Windows operating system files that have accidentally erased
2. There is a virus, trojan or spyware that follow-up 'loading' when the computer startup
3. There are files (drivers) that is broken is broken, and when read by the Windows failed
4. There is damage to the hardware, especially in the computer memory or hard disk
5. Windows operating system corrupted or not complete installed
6. There are settings in the BIOS-setting is not correct or change a new

How to check and it is:

1. Startup using 'safe mode' (press F5 when the computer would first go to Windows, select 'safe mode'). If the computer successfully into the Windows means that there is a 'loading' which can not be read correctly by Windows. Turn off the 'loading' with the command 'msconfig' at the startup (panggilnya in start> run> msconfig)

2. If the computer can not go to Windows, the easiest way is a repair of Windows. How is enter the Windows installation CD, change the BIOS to continue through the startup CD / DVD-ROM, after installation into the Windows install, the repair option of Windows. You can re-install Windows to a new folder or hard drive format when that failed to repair Windows.

3. Make sure you do not first have to change BIOS settings before, if you should return it as if you should forget to select the option 'Loading default BIOS'.

4. If the above steps all fail, there is likely damage to the hardware you. Damage is generally located on the memory and hard disk. VGA and mainboard may be damaged, but the probability is very small.